Festo SMEO-1-LED-24-B Proximity Sensor - 2.5m 30459
 Click to enlarge |
|
Festo 30459 SMEO-1-LED-24-B Proximity Sensor
Part No: 30459
Proximity Sensor With reed contact and light-emitting diode, without mounting kit.
Length: 2.5m
Heat resistant proximity sensor (-S6)
Normally open contact
24 V DC or 230 V AC
In-line connection
Switching status is indicated by means of an LED
Function SME, SMEO (contact type)
SME contact-type cylinder sensors consist of a reed switch whose contacts close when a magnetic field approaches, thus generating a switching signal.
SME proximity sensors are used mainly in applications where it is necessary to switch high load currents (e.g. for the direct control of electrical consuming devices). In applications involving large capacitive loads or long cable lengths (> 7.5 m), a protective circuit must be provided.
| Feature | Values |
|---|---|
| Operating voltage range DC | 12 - 27 V |
| Switch output | with contact, bipolar |
| Switching element function | Normally open contact |
| Max. output current | 1 A |
| Cable length | 2.5 m |
| Electrical connection | Cable 3-core |
| Design | Block design |
| Short circuit strength | No |
| Measuring principle | Reed magnetic |
| Polarity protected | No |
| Operating status display | Yellow LED |
| Switch-off time | 0.03 ms |
| Switch-on time | <= 0.5 ms |
| Max. contact rating DC | 27 W |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| Protection class | IP67 |
| Ambient temperature | -5 - 70 °C -20 - 70 °C |
| Product weight | 85 g |
| Reproducibility of switching value | +/- 0,1 mm |
| Mounting type | with accessories |
| Materials note | Free of copper and PTFE |
| Materials information, housing | Zinc die-casting |
| Materials information, cable sheaths | PVC |
PS1
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
-500x500.png "Festo SMEO-1-LED-24-B Proximity Sensor - 2.5m 30459")
Click to enlarge
